< Back to 68k.news US front page

SpaceX launches Starlink rideshare mission as constellation deployment milestone nears - NASASpaceFlight.com

Original source (on modern site) | Article images: [1] [2]

SpaceX launched its third Starlink mission in just 11 days on the v1.0 L26 flight. The mission brings the total number of operational Starlink v1.0 satellites launched to near 1,567 - just shy of the 1,584 needed to declare all of the first shell of Starlinks launched.

The mission, with 52 Starlink satellites and two rideshare payloads (Capella Whitney 4 and Tyvak-0130), launched on a Falcon 9 from Launch Complex 39A at the Kennedy Space Center on Saturday, 15 May at 18:54 EDT / 22:54 UTC.

Overall, this was the 28th Starlink mission, the 27th flight of operational Starlinks, the 15th Falcon 9 flight of the year, the fourth Starlink rideshare mission, the third time a Falcon 9 first stage will fly for an eighth time, and the third Falcon 9 flight in 11 days.

It will marked the first launch from the Eastern Range since the 45th Space Wing was renamed Space Launch Delta 45 on 11 May. The change was in accordance with new U.S. Space Force naming conventions as the newest branch of the U.S. armed services activates the Space Systems Command. 

A similar event occurred at Vandenberg, where the 30th Space Wing was renamed Space Launch Delta 30. At the same event, Vandenberg Air Force Base was renamed Vandenberg Space Force Base. 

Starlink v1.0 L26 lifted off 24 years to the day, and from the same pad, as the STS-84 flight of Space Shuttle Atlantis on the sixth Shuttle-Mir docking mission.

Continuing the rocket reuse operations LC-39A has fostered since April 1981, Falcon 9, under the power of first stage booster B1058-8 (with the "-8" signifying the stage's 8th flight), delivered 52 new Starlink satellites, as well as Capella Whitney 4 and Tyvak-0130, to orbit.

Starlink is SpaceX's low Earth orbit internet constellation aimed at delivering fast, affordable, and low latency service where internet is currently unavailable or expensive.

The Starlink constellation is set to consist of five orbital shells, with the Starlink v1.0 L26 mission continuing to build the first shell of 1,584 satellites in a 550 kilometer altitude, 53 degree inclination orbit. Deployment of this shell began on 11 November 2019 and will reach the "all satellites launched" milestone with the next mission: Starlink v1.0 L28.

Once all of the first shell Starlinks are in their correct positions within the constellation, which will take a few more months to complete, the network will provide coverage to approximately 80% of Earth's surface.

This mission in particular deviated from most Starlink flights thus far in that it carried rideshare payloads with a reduced number of Starlink satellites to account for payload volume and mass-to-target-orbit constraints. Joining the Starlinks on this mission were Capella Whitney 4 and Tyvak-0130.

Capella Whitney 4 is part of a Synthetic Aperture Radar satellite constellation operated by Capella Space. At 112 kg, the satellite uses an X-band, 3.5 meter aperture antenna to obtain high-contrast, low-noise, high-resolution sub-0.5 meter imagery of Earth's surface no matter the weather conditions.

Some extra frames for your enjoyment. Have I mentioned this booster has launched 7 missions in just over 10 months? Whoa. 🤯

Catch all the action here in Port Canaveral live on Fleetcam 24/7: https://t.co/ywyyELWJeh pic.twitter.com/UxviRcG1VX

— Stephen Marr (@spacecoast_stve) April 10, 2021

The first of the 36 planned satellites of the constellation launched in August 2020 on the Rocket Lab "I Can't Believe It's Not Optical" mission. The other two already-launched Capella satellites were part of the Transporter-1 mission earlier this year.

Tyvak-0130, an optical spectrum astronomy observation satellite, is built by Tyvak Nano-Satellite Systems.

Launch

After a multi-hour, no holds, countdown, Falcon 9's launch autosequence began at T-35 minutes and counting. At this time, an automated series of events unfolded to thermally condition and load the Falcon 9 first and second stages with liquid oxygen and RP-1 kerosene.

Loading of RP-1 kerosene on both stages began at T-35 minutes, as did liquid oxygen loading on the first stage. RP-1 fueling on the second stage was completed at the T-20 minute mark, with liquid oxygen fueling of stage two commencing four minutes later.

To prepare the nine first stage Merlin 1D engines for ignition, engine chill began at T-7 minutes — where super cold liquid oxygen is allowed to slowly bleed into the engine plumbing, cooling the engines to within an acceptable "start box", or temperature range, for engine ignition.

At the T-2 minute mark, fueling was completed. A minute later, the Falcon 9's onboard computers took control of the countdown, a milestone known as "startup."

B1058-3 launches the Starlink V1.0 L13 mission. (Credit: SpaceX)

At T-3 seconds, the onboard computers commanded ignition of all nine first stage engines. At liftoff, the hold-down clamps released the Falcon 9 rocket while the transporter/erector rapidly retracted to 45 degrees to protect its systems from the blast of the rocket's engines.

Soon after, the Falcon 9 pitched downrange, traveling northeast from the Kennedy Space Center, aligning the launch vehicle for its 53 degree inclined orbit.

The nine Merlin 1D engines on the first stage shut down at T+2 minutes 31 seconds, followed by stage separation and second stage ignition. The Falcon 9 can compensate for multiple-engines-out during first stage flight by burning the remaining engines longer than pre-flight predictions to achieve the velocity target the second stage needs to begin with in order to make orbit.

Shortly after separation, the four titanium grid fins on the first stage deployed, followed by a flip maneuver to align booster B1058 properly for reentry.

At T+3 minutes 16 seconds, payload fairing separation occurred from stage two. Similar to other missions, the set of flight-proven fairings — with the active half last supporting SiriusXM-7 and the passive half last supporting NROL-108, both in December 2020 — parachuted directly into the ocean for recovery, as SpaceX appears to have settled on this method as the most efficient option.

Once in the ocean, both halves will be recovered by the chartered recovery vessel Shelia Bordelon, which left Port Canaveral on 12 May for the mission.

B1051-9 is still onboard OCISLY while B1058-6 is being prepared for transport this morning. Let's take a look at the #SpaceXFleet and the hardware making reusibility possible with an I-Spy Port edition thread. #SpaceX #Starlink pic.twitter.com/ndgQBpJFLn

— Julia (@julia_bergeron) March 17, 2021

Meanwhile, as the payload fairings begin their return journey, the second stage continued firing its vacuum-optimized Merlin engine to bring the payload to orbit as the first stage, descended through the atmosphere, reignited three of its Merlin 1D engines to slow itself down and protect itself during reentry.

The center Merlin 1D engine then relighted one more time for the landing burn to place the booster on Of Course I Still Love You, stationed approximately 630 km northeast of the launchpad and 240 km off the coast of North Carolina.

Falcon 9 B1058-8 lands on OCISLY.

Another bullseye.

They used to call the first stage of rockets "dumb boosters". Not anymore! pic.twitter.com/Jtvwr3FCS6

— Chris B - NSF (@NASASpaceflight) May 15, 2021

About 20 seconds after the booster's landing, the second stage shut down following insertion into an initial parking orbit. After coasting for 45 minutes 56 seconds, the stage reignited for a four second burn to place the stack into a 569 x 582 kilometer orbit, per pre-flight TLEs — Two-Line Elements, or orbital tracking information.

This orbit is higher than Starlink-only missions, which typically target a 260 x 280 kilometer orbit, due to the needs of the rideshare payloads.

Two minutes after the second burn is complete, Tyvak-0130 deployed, followed three and a half minutes later by Capella. At T+98 minutes 10 seconds, all 52 Starlink satellites scheduled deployment.

SpaceX booster fleet update

After landing, booster B1058-8 will be brought back to Port Canaveral, where it will continue to serve the SpaceX booster fleet. B1058 is one of five Falcon 9 boosters introduced in 2020 and first supported the Demo-2 crewed mission in May 2020, launching Dragon Endeavour and becoming the first SpaceX rocket to launch crew.

List of active boosters:

Booster Debut Flight Most-recent Flight 1049-9 Telstar 18V - 10 September 2018 Starlink v1.0 L25 - 4 May 2021 1051-10 Demo 1 - 2 March 2019 Starlink v1.0 L27 - 9 May 2021 1052-2 Arabsat 6A - 11 April 2019 STP-2 - 25 June 2019 1053-2 Arabsat 6A - 11 April 2019 STP-2 - 25 June 2019 1058-7 Demo 2 - 30 May 2020 Starlink v1.0 L23 - 7 April 2021 1060-7 GPS III SV03 - 30 June 2020 Starlink v1.0 L24 - 29 April 2021 1061-2 Crew 1 - 16 November 2020 Crew 2 - 23 April 2021 1062 GPS III SV04 - 5 November 2020 GPS III SV04 - 5 November 2020 1063 Sentinel 6A - 21 November 2020 Sentinel 6A - 21 November 2020

While B1052-2 and B1053-2 are both included on this list, their status as "active" can rightly be called into question as SpaceX, despite Elon Musk's statements that Falcon Heavy side boosters are regular Falcon 9s that just need to have their nosecones replaced with interstages, has shown no interest — despite need — to convert the side boosters.

This need stems from the losses of B1056-4 and B1048-5 on the back-to-back Starlink v1.0 L4 and L5 missions in early 2020 and the more-recent loss of B1059-6 on the Starlink v1.0 L23 mission — all of which were lost during landing attempts after sending the second stage on its way to a successful orbit.

Instead of bringing the two Falcon Heavy side boosters into the general Falcon 9 fleet, SpaceX instead has pulled B1063-1 from the west coast and moved it to Florida to assist with the upcoming flight manifest. It will launch the Starlink v1.0 L28 mission no earlier than 26 May.

B1067, debuting on CRS-22 on 3 June, will aid upcoming flights as well.

Likewise, active booster B1061-2, which had been held in storage for Crew-2 for NASA, is now eligible for regular Falcon 9 manifest missions while B1062-1, which has been held in storage for the upcoming GPS III SV05 mission, will also be able to join the larger fleet after that flight launches no earlier than 17 June.

How SpaceX manages the fleet will be interesting to watch as regular missions from Vandenberg are set to resume no earlier than July with the start of Starlink polar launches from the west coast facility.

(Lead image: Falcon 9 B1058 departing 39A. Credit: Stephen Marr for NSF)

< Back to 68k.news US front page